JTAG Test

FAQ: Cannot perform SAMPLE operation on Lattice MachXO

Filed under FAQ / JTAG IEEE 1149.1

Q: Cannot perform SAMPLE operation on Lattice MachXO

Answer:

The SLEEPN pin is used to put the device in Sleep mode. It must be High throughout the entire BSCAN testing. The un-programmed MachXO devices do not support the SAMPLE instruction.
Warning: stristr() expects parameter 1 to be string, array given in /data/www/secons/jtagtest.com/htdocs/faq.php on line 141

Warning: stristr() expects parameter 1 to be string, array given in /data/www/secons/jtagtest.com/htdocs/faq.php on line 141

Warning: stristr() expects parameter 1 to be string, array given in /data/www/secons/jtagtest.com/htdocs/faq.php on line 141

Warning: stristr() expects parameter 1 to be string, array given in /data/www/secons/jtagtest.com/htdocs/faq.php on line 141

Warning: stristr() expects parameter 1 to be string, array given in /data/www/secons/jtagtest.com/htdocs/faq.php on line 141

Warning: stristr() expects parameter 1 to be string, array given in /data/www/secons/jtagtest.com/htdocs/faq.php on line 141

Warning: stristr() expects parameter 1 to be string, array given in /data/www/secons/jtagtest.com/htdocs/faq.php on line 141

Warning: stristr() expects parameter 1 to be string, array given in /data/www/secons/jtagtest.com/htdocs/faq.php on line 141

Warning: stristr() expects parameter 1 to be string, array given in /data/www/secons/jtagtest.com/htdocs/faq.php on line 141

Warning: stristr() expects parameter 1 to be string, array given in /data/www/secons/jtagtest.com/htdocs/faq.php on line 141

Warning: stristr() expects parameter 1 to be string, array given in /data/www/secons/jtagtest.com/htdocs/faq.php on line 141

Warning: stristr() expects parameter 1 to be string, array given in /data/www/secons/jtagtest.com/htdocs/faq.php on line 141

Warning: stristr() expects parameter 1 to be string, array given in /data/www/secons/jtagtest.com/htdocs/faq.php on line 141

Warning: stristr() expects parameter 1 to be string, array given in /data/www/secons/jtagtest.com/htdocs/faq.php on line 141

Warning: stristr() expects parameter 1 to be string, array given in /data/www/secons/jtagtest.com/htdocs/faq.php on line 141

Warning: stristr() expects parameter 1 to be string, array given in /data/www/secons/jtagtest.com/htdocs/faq.php on line 141

Warning: stristr() expects parameter 1 to be string, array given in /data/www/secons/jtagtest.com/htdocs/faq.php on line 141

SECONS Ltd. is not in any way connected with integrated circuit manufacturers and there is no any type of authorization, association or affiliation between SECONS and integrated circuit manufacturers. All information present in this FAQ is provided for informational purposes only, on "as-is" basis, and is intended to be useful and informative for SECONS customers.
Copyright (c) SECONS s.r.o. 2008 | Legal info